| Customization: | Available |
|---|---|
| Structure: | Double-End |
| Pressure: | ≦1.5MPa |
|
Still deciding? Get samples of US$ 50/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Basic Features
Structure: Double-End
Pressure: High Pressure Mechanical Seals
Speed: General Speed Mechanical Seal
Temperature: Poor Temperature Mechanical Seal
Performance: Corrosion
Standard: Specific Customization
Model NO.: SAF
Balance: Balanced
Specification: Inner Diameter: 45 mm to 200 mm
Product Detailed Description
SAF Mechanical Seal for Paper-making Equipment and Pressure Screens (for paper pulp agitation)
Structural Features: double-end, multiple springs, with spring protector, balanced, independent direction of rotation, spring standing mechanical seal. The component is cartridge seal with easy installation. The springs are not touching the sealed mediums so that there will be no jam caused by the high viscosity and crystallization active content. This makes sure the flexibility of the compensation ring and as a result, it lasts the lifetime of the whole component. Multi spring structure makes the load on the sealing faces balanced. The seal needs to work with sealing water, which has the pressure of 0.1 - 0.3 MPa and flow rate of 3 - 8 L/min.
Industrial Standards: Specific Customization.
Scopes of Application: mainly used in chemical engineering, pulp production, pulp drying, pulp screening, and sewage treatment. Designed for pressure screens and other filters. This component can work as an alternative to ANDRITZ SafeMatic seal support system.
Operation Parameters:
Pressure: 0 ~ 1.5 MPa or less
Temperature: - 40 ~ 180 ºC
Linear Speed: 20 m/s or less
Pressure of Cooling Water: 1.25 times higher than the subject's operating pressure
Solid Capacity: 15% or less
Materials:
Rotary Ring Face
Medium Side: SiC/TC
Sealing Water Side: SiC/TC
Stationary Ring Face
Medium Side: SiC/TC
Sealing Water Side: Carbon/SiC/TC
Elastomers: EPDM/PTFE/Aflas
Springs: SS316/HC276
Metal Parts: SS304/SS316/SS316L/2507/2205
Mediums: oil, water, sulphite lyes, paper pulp, acid, alkali and other solvents.
Customization: Changes of materials for getting other operating parameters are possible. Contact us with your requirement
){kind=link}